Need help with your Kurio Watch?
Many people can quickly resolve technical issues by checking our FAQ before contacting tech support. Please take a look and see if that speeds things up for you.
To get the best from your Bluetooth® connection, please refer to the recommendations shown below.
You can use your Bluetooth® connection:
Just like you connect another Kurio Watch, a Bluetooth® headset is like a classic device. You can follow the Bluetooth® connection principles listed before.
By default the Smartphones are sharing the contacts with the Bluetooth® devices. To avoid any unfortunate calls, go into your smartphone Bluetooth® settings and set the sharing parameters to un-authorize the contacts sharing.
Ensure your Kurio Watch is not actively connected to another device. If it is, it must first disconnect from that device before being visible and being able to connect to the device of your choice.
Go into the SETTINGS / DISPLAY / SCREEN you can now set the screen time out from 6 sec to 60 sec.
You have 2 possibilities. First one : Swipe down to display the Option bar, you can there adjust the volume.
Second one :Go into SETTINGS / SOUNDS you can now adjust the volume and even set it on Mute if you want.
Go into SETTINGS / DISPLAY / SCREEN you can now adjust the luminosity.
Before you start the app, connect the Android device to the Kurio Watch through the settings/Bluetooth menu of the Android device.
Make sure that the volume of the Android device is loud enough.
The Kurio Watch cannot be updated.
The wristband length is from 13cm to 25cm circumference. There are 6 holes to adjust the Kurio Watch to your wrist.
It is not possible to add applications or games on the Kurio Watch.
The Kurio watch can count your steps when you turn the Activity tracker on. You will even have funny notifications each time you reach a new objective like walking for 30 min.
You don’t need internet to use the Kurio watch.
You don’t need a smartphone to use the Kurio watch.
There is no GPS in the Kurio Watch.
No, you can’t connect your Kurio Watch to a Wifi network.
The Kurio Watch can be connected by Bluetooth to iPhone. But the Kurio Watch Messenger App is not available for iPhones.
Yes you can insert a SD card into the slot on the right side of the Kurio Watch.
No it is not provided with the Kurio Watch.
To save pictures and to access them from the Kurio Watch, please do the following :
• Insert your SD card into the Kurio Watch.
• In the settings, choose the options SYSTEM/SAVING, press Photos/videos saved on = SD Card. Exit from settings.
• Now insert the SD card into your computer.
• Save your pictures on the SD card in the directory labelled GALLERY.
• Insert the SD card into the Kurio Watch.
• In SETTINGS, choose the options SYSTEM/SAVING, press Photos/videos saved on = SD Card. Exit from settings.
• Now you can go in the GALLERY and see your pictures.
NOTE : This is the same process if you want to save music on your SD card. Just save your music files in the directory music.
By default the pictures and videos are saved into the internal memory.
You can save about 800 pictures or 200 videos of 10s.
It takes two hours and half to charge the Kurio Watch. And the discharging time is about 2 hours (if being used constantly).
Indeed a factory reset will erase all the data saved in your device, including the pre-loaded music files.
If the device freezes, try switching off and on again.
If you cannot switch it off, please press the Reset Button.
To do so – please note that the Reset button is located on the left-hand side of the Kurio Watch, under the USB rubber cover. Once you have lifted the USB rubber cover, you will see a small hole. Insert a paper clip to in the hole, and press once to Reset. This will automatically restart the Kurio Watch.
You need to install the Kurio Watch Messenger app on your Android device in order to exchange messages between the two devices.
Yes you can change them. You have to go through the settings and enter your password, you can find your password in the user manual.